SB12FFront-Mount Snowblower
- Remove snow while driving forward
- 80-inch clearing capacity
- 245° hydraulic chute rotation
- Hydraulic chute deflector - field installed
Features
Expand All
Collapse All
Remove Snow while Driving Forward
The SB12F Series is a heavy-duty front mount snow blower that reduces operator fatigue and increases productivity while maneuvering tight spaces.
Operators can focus on what’s ahead and reduce snow compaction. The SB12F Series Front Mount Snowblower eliminates the need for an operator to constantly be turned around during snow removal, causing less strain and operator fatigue, especially during long working hours and for less experienced operators. Operators can perform snow removal jobs while focused on what’s ahead, instead of behind them, with a front mounted snowblower.
Improving maneuverability with the subframe hitch, SF12F to sit close to the tractor for easy control in tight spaces. The subframe hitch will mount to both the front and underside of the tractor, providing additional reinforcement to the tractor and for the PTO shaft that carries power from the rear PTO.
80-inch Clearing Capacity
The SB12F Series Front Mount Snowblower has a clearing width of 80-inches. Built to handle all types of snow removal, it is ideal for both large residential and commercial jobs.
Adjustable skid shoes extend Snowblower Life
The in-base skid shoes on the SB12F Series will extend the life of your snowblower by elevating it off the ground to protect the bottom side in tough conditions. Skid shoes are mounted to each side of the snowblower to ensure a smooth cleaning operation.
Skid shoes are both adjustable and replaceable. Adjusting your skid shoes will help to prevent damage, or injury, from thrown debris; and can be easily replaced it they wear out from excessive use.
In-base skid shoes are made of high-carbon steel.
245° of Hydraulic Chute Rotation
Operators can adjust the chute direction quickly and conveniently from the seat of their tractor, with in-base Hydraulic Chute Rotation. Rotate chute up to 245 degrees to throw snow where desired.
Cutting Edge Durability for Lasting Performance
The SB12F Series Snowblower comes standard with a replaceable and reversible cutting edge, made of steel that has the durability needed to scrape the layer of ice underneath the snow.
- Steel provides significant wear life improvement for commercial applications or in abrasive conditions, while protecting the snow blower housing from the snow removal surface.
- Reversible cutting edges provide long-lasting performance and twice the wear life.
- Cutting Edges can be easily unbolted and replaced if worn out from excessive use.
- Tivar Poly Cutting Edge is available as a dealer-installed option.
Hydraulic Chute Deflector (Field Installed)
Control the blowing angle directly from the seat of the tractor with the Hydraulic Chute Deflector Kit, increasing productivity by reducing the operators down-time getting off and on the tractor.
*Requires 3rd Function Loader Controller*
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere SB12F Front-Mount Snowblower |
Dimensions
| Height | 76.2 cm 30 in. |
|||
|---|---|---|---|---|
| Transport width | 204.5 cm 80.5 in. |
|||
| Working width | 203.2 cm 80 in. |
|||
| Length | 124.5 cm 49 in. |
Weights
| Operating | 406 kg 895 lb |
|||
|---|---|---|---|---|
| Shipping | 461.3 kg 1017 lb |
Chute
| Type | Three-part | |||
|---|---|---|---|---|
| Deflector adjustment | Standard Hydraulic |
|||
| Rotation type | Hydraulic | |||
| Diameter | 26.7 cm 10.5 in. |
|||
| Rotation degrees | 210 degree (angle) |
Drum
| Rotation |
|---|
Auger
| Diameter | 50.8 cm 20 in. |
|||
|---|---|---|---|---|
| Speed | 170 rpm | |||
| Overload protection | Single |
Impeller
| Blades | Four | |||
|---|---|---|---|---|
| Speed | 540 rpm | |||
| Diameter | 66 cm 26 in. |
|||
| Width | 26.7 cm 10.5 in. |
|||
| Optional secondary auger diameter |
Tractor compatibility
| PTO | 540 rpm | |||
|---|---|---|---|---|
| Minimum hp | 22.4 kW 30 hp |
|||
| Maximum hp | 60 hp 80 hp |
|||
| PTO overload protection | Shearbolt |
Chain
| Roller | 60 | |||
|---|---|---|---|---|
| Idler adjustment | Automatic |
Hitch
| Compatibility | Cat. 1, 2 | |||
|---|---|---|---|---|
| iMatch | Yes | |||
| Quick coupler | Yes |
Cutting edge
| Type | Replaceable |
|---|
Skid shoes
| Type | Steel, adjustable |
|---|
Set-up time
| Labor hours | One hour |
|---|
Warranty period
| Machine | One year | |||
|---|---|---|---|---|
| Gear box | One year |
Additional information
| Date collected |
|---|
-
AF10F Front Blade -
AF11D Series Front Blades -
AF11E Series Front Blades -
AF11G Series Front Blades -
AF12D Series Front Blades -
AF12G Series Front Blades -
AS10F Series Snow Pushes -
AS10H Series Snow Pushes -
AS11E Series Snow Pushes -
SB11 Series Snowblowers -
SB11P Series Pull Type Snowblowers -
SB12 Series Snowblowers -
SB13 Series Snowblowers -
SB21 Series Snowblowers -
SW21 Series Rotary Brooms