Rotary Cutters | RC7M Rotary Cutter

Features

What is the best cutter for your job?

NOTE: Only for single spindle and multi-spindle.

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.

Here are situations when a rotary cutter provides value:

Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
Cutting grass and stalks helps control insects.
Routine cutting keeps weeds from reseeding.
It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
Cutting grass waterways encourages root development and helps prevent erosion.
Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
Clearing out brush.
Control undergrowth and grass in orchards, vineyards, and groves.

Decide what model to use based on:

The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

John Deere rotary cutters are available in two duty-level categories:

Mid-duty
- RC M models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
- This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
Heavy-duty
- RC R models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
- This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
- RC6R is available in 1.8-m (6-ft) and the RC7R is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

NOTE: R Series are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.

Front and rear safety chain shields are standard

Front safety chains (RC6M shown)

Rear safety chains (RC6M shown)

Front and rear chain shields are standard equipment:

Offer protection for the operator yet allow uncut material to pass into the cutting chamber with minimal restriction

Standard suction blades provide additional blade lift

Suction blade (standard equipment)

Suction blades provide additional lift action for picking up downed material. The blades are 1.3 cm x 10.2 cm (0.5 in. x 4 in.) in size and heat-treated for long wear life.

The fast blade-tip speed ensures clean cutting and fine shredding of material.

Up to 88.5 m/sec (17416 fpm)

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Five-year warranty on all flex-wing gearboxes

Five-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

Show More Show Less

Specifications

Select up to 4 models to compare specifications

John Deere

RC7M

Rotary Cutter

Cutting width

2,130 mm
84 in.

Cutting height

25 to 241 mm
1 to 9.5 in.

Cutting capacity

50 mm
2 in.

Cutting chamber Depth

216 mm
8.5 in.

Tractor PTO HP range

Minimum 30 kW
40 hp

Tractor PTO

540 rpm

Type

Lift-type

Date collected

3.9% APR for 24 months†

on New John Deere Rotary Cutters

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

Up To 20% OFF Rotary Cutter Blades†

for various rotary cutter models.

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

12% OFF Select Attachments†

for Round Balers & Rotary Cutters

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

Show More Show Less

Transport width	2,242 mm 88 in.
Overall width	2,242 mm 88 in.
Overall length	3,210 mm 126 in.
Deck shape	Domed
Deck type	Double decker
Deck thickness	Upper 3.5 (10) mm 0.138 (10) in. Lower 3.5 (10) mm 0.138 (10) in.
Side skirt thickness	6 (3) mm 0.25 (3) in.
Approx. weight	605 kg 1,332 lb

Size	Main ASAE Category 4
Protection	Main Slip-clutch driveline

Thickness	13 mm 0.5 in.
Width	102 mm 4 in.
Type	Suction
Overlap
Blade tip speed	540 RPM 4,932 m/min 16,182 fpm 296 km/h 184 mph
Material flow system	Max flow
Holder	Type Round stump jumper

Blade tip speed - 540 rpm
Cutting capacity
Cutting width
Deck thickness - Upper - Lower
Drivelines - Size - Main
Hitch - Category
Protection - Main
Shielding - front/rear
Side skirt thickness
Tractor PTO HP range

RC7MRotary Cutter

Features

What is the best cutter for your job?

Front and rear safety chain shields are standard

Standard suction blades provide additional blade lift

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Specifications

Add Model

Capacity

Tractor compatibility

Hitch

Dimensions

Drivelines

Gearcases

Blades

Wheels

Shielding

Additional information

Key Specs

Offers and Discounts

3.9% APR for 24 months†

Up To 20% OFF Rotary Cutter Blades†

12% OFF Select Attachments†

Shop and Buy

Maintenance and Support

You May Also Be Interested In

Number	1
HP rating	Center Continuous 56 kW 75 hp Peak 75 kW 100 hp

Type	Puncture proof laminated (optional dual tail wheels)
Row width adjustment

Front	Chain
Rear	Chain

RC7MRotary Cutter

SHARE

Features

What is the best cutter for your job?

Front and rear safety chain shields are standard

Standard suction blades provide additional blade lift

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Specifications

Add Model

Capacity

Tractor compatibility

Hitch

Dimensions

Drivelines

Gearcases

Blades

Wheels

Shielding

Additional information

Key Specs

Offers and Discounts

3.9% APR for 24 months†

Up To 20% OFF Rotary Cutter Blades†

12% OFF Select Attachments†

Related Products

Shop and Buy

Maintenance and Support

You May Also Be Interested In