Rotary Cutters | RC7R Rotary Cutter

Features

What is the best cutter for your job?

NOTE: Only for single spindle and multi-spindle.

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.

Here are situations when a rotary cutter provides value:

Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
Cutting grass and stalks helps control insects.
Routine cutting keeps weeds from reseeding.
It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
Cutting grass waterways encourages root development and helps prevent erosion.
Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
Clearing out brush.
Control undergrowth and grass in orchards, vineyards, and groves.

Decide what model to use based on:

The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

John Deere rotary cutters are available in two duty-level categories:

Mid-duty
- RC M models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
- This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
Heavy-duty
- RC R models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
- This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
- RC6R is available in 1.8-m (6-ft) and the RC7R is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

NOTE: R Series are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.

Double-Decker™ helps to maintain your cutter clean

Exclusive double-deck in RC6R

All the RC M and R Series Rotary Cutters have the patented Double-Decker™ design. The smooth dome-shaped decks provide easy cleaning and water runs off for longer product life. Deck thickness increases as the size and cutter duty level increases.

Gearcases and blade holders provide better performance

Gearcase and blade holder shown

The John Deere RC gearboxes:

Large seals
Large housing
Large output shaft
Precision forged bevel gears
Large bearings
Stump jumper

RC gearcases and blade holders provide the following:

More horsepower
Faster blade-tip speed
Better performance
Quieter operation
Increased durability

Heavy-duty John Deere-designed gearcases

Heavy-duty gearcase

The heavy-duty gearcase with non-seize self-adjusting slip-clutch driveline is shown at left.

The gearcase horsepower rating is as follows:

150 hp (112 kW) continuous
210 hp (157 kW) peak

Cast-metal gearcase features:

Tapered roller bearings and forged gears for longer life (forged gears are stronger because as the gear is heat-forged into shape, the grain of the metal changes to follow the outline of the teeth).
Output shafts are splined, not just keyed, for extra strength.
Gearcase is solidly mounted to the frame for a long, trouble-free life.
- Six mounting bolts (not four) are used.
- Possibility of flange locknuts fracturing from stress or working loose in tough operating conditions is reduced.
- Frame metal underneath the gearcase is double thickness for more strength.

The factory preset, four-plate slip clutch protects the driveline:

Especially valuable when operating in brush
Preset at the factory and never needs adjusting
Fully shielded driveline for safety

The RC6R and RC7R gearcases come standard with a five-year warranty.

Deep-cutting chamber provides a better shredding action

RC6R and RC7R deliver a clean cut

The fast blade-tip speed ensures clean cutting and fine shredding of material.

RC6R: 13,623 fpm (69.2 m/sec) and 155 mph
RC7R: 16,061 fpm (81.6 m/sec) and 183 mph

A forward tip adjustment allows the cutter to be tilted forward slightly, so most of the cutting occurs in the front while the shredding action occurs toward the rear:

Improves cutting job
Reduces horsepower requirements

The tapered rear opening spreads shredded material across entire width of cut:

Reduces windrowing
Leaves an even blanket of mulch

Front and rear safety chains are standard for increased protection

Front safety chain shield

Rear safety chain shield

Front and rear safety chain shields are standard equipment. They offer protection yet allow material to pass into the cutting area with minimal obstruction:

They help deflect thrown material and improve shredding.

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Five-year warranty on all flex-wing gearboxes

Five-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

Show More Show Less

Specifications

John Deere

RC7R

Rotary Cutter

Cutting width

2,134 mm
84 in.

Cutting height

50 to 229 mm
2 to 9 in.

Cutting capacity

101.6 mm
4 in.

Cutting chamber Depth

300 mm
11.8 in.

Tractor PTO HP range

Minimum 34 kW
45 hp

Tractor PTO

540 rpm

Type

Lift-type

Date collected

No money down and competitive financing†

on New John Deere Rotary Cutters

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

Up To 20% OFF Rotary Cutter Blades†

for various rotary cutter models.

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

12% OFF Select Attachments†

for Round Balers & Rotary Cutters

†For complete details regarding this offer, please select the corresponding link below.

View Offer Details

Show More Show Less

Transport width	2,261 mm 89 in.
Overall width
Overall length
Deck shape	Domed
Deck type	Double decker
Deck thickness	Upper 3 (11) mm 0.118 (11) in. Lower 3.5 (10) mm 0.138 (10) in.
Side skirt thickness	6 (3) mm 0.25 (3) in.
Approx. weight	625 kg 1,378 lb

Size	Main ASAE Category 4
Protection	Main Non-seize, slip-clutch driveline

Thickness	13 mm 0.5 in.
Width	102 mm 4 in.
Type	Single suction
Overlap
Blade tip speed	540 RPM 4,751 m/min 15,586 fpm 285 km/h 177 mph
Material flow system	Integrated
Holder	Type Round stump jumper (single suction) for protection of blades and carrier against obstruction damage

Blade tip speed - 540 rpm
Cutting capacity
Cutting width
Deck thickness - Upper - Lower
Drivelines - Size - Main
Hitch - Category
Protection - Main
Shielding - front/rear
Side skirt thickness
Tractor PTO HP range

RC7RRotary Cutter

Features

What is the best cutter for your job?

Double-Decker™ helps to maintain your cutter clean

Gearcases and blade holders provide better performance

Heavy-duty John Deere-designed gearcases

Deep-cutting chamber provides a better shredding action

Front and rear safety chains are standard for increased protection

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Specifications

Capacity

Tractor compatibility

Hitch

Dimensions

Drivelines

Gearcases

Blades

Wheels

Shielding

Additional information

Key Specs

Offers and Discounts

No money down and competitive financing†

Up To 20% OFF Rotary Cutter Blades†

12% OFF Select Attachments†

Shop and Buy

Maintenance and Support

You May Also Be Interested In

Number	1
HP rating	Center Continuous 112 kW 150 hp Peak 152 kW 205 hp

Front	Chain
Rear	Chain

RC7RRotary Cutter

SHARE

Features

Five-year limited gearbox warranty provided on every John Deere rotary cutter

Specifications

Capacity

Tractor compatibility

Hitch

Dimensions

Drivelines

Gearcases

Blades

Wheels

Shielding

Additional information

Key Specs

Offers and Discounts

Related Products

Shop and Buy

Maintenance and Support

You May Also Be Interested In