Close up image of a John Deere air compressor

Air Compressors

Open up an entirely new toolbox with a powerful John Deere air compressor. Power up everything from air wrenches to drills, grinders and paint guns. You'll find a wide range of horsepower and capacity to suit your needs. And you'll get the satisfaction of a job well done.

HR Series / Electric / Oil-Less

ImageProductDetails

hr1-2q oil air compressor

2.5-Gallon, Oil-Less, Electric Hand-Carry 1.0 HP, 120V Induction Motor

  • 2.4 CFM @ 90 PSI
  • Compact and portable 2.5-gallon receiver tank
  • Canister intake filter
  • Regulator and two gauges for tank and outlet pressure
  • Also start/stop control set at 95-125 PSI
  • Drain valve and pressure relief valve
  • 1/4-inch quick connect fittings
  • Rubber isolators
  • 45 lbs.
  • 15.7” x 15.5” x 14.7” (L x W x H)

HR1-20Q

HR1-20Q

 

20-Gallon, Oil-Less, Electric 1.5 HP, 120V Induction Motor

  • 4.0 CFM @ 90 PSI – Upright portable design
  • 20-gallon receiver tank
  • 2 semi-pneumatic tires
  • Protective pump/motor housing
  • Dual canister intake filters
  • Regulator and two gauges for tank and outlet pressure
  • Also start/stop control set at 95-125 PSI
  • Drain valve and pressure relief valve
  • 1/4-inch quick connect fittings
  • Rubber isolators
  • 109 lbs.
  • 21.3” x 17.4” x 41.2” (L x W x H)

HR Series / Electric

ImageProductDetails

HR1-5E Air Compressor

5-Gallon, Single-Stage, Electric Hand Carry 2.0 HP, 120V Motor

  • 4.1 CFM @ 100 PSI
  • Compact and portable twin-tank design
  • 5-gallon twin tank receivers, side stack
  • Protective pump/motor housing
  • Canister intake filter
  • Regulator and two gauges
  • Also start/stop control set at 95-125 PSI
  • Drain valves and pressure relief valve
  • Quick connect fittings
  • Rubber isolators

HR1-20E  Air Compressor

HR1-20E

 

20-Gallon, Single-Stage, Electric  2.0 HP, 120V Motor

  • 2.0 HP, 120V Motor 4.1 CFM @ 100 PSI – Upright portable design
  • 20-gallon receiver tank
  • 2 semi-pneumatic tires
  • Protective pump/motor housing
  • Canister intake filter
  • Regulator and two gauges
  • Auto start/stop control set at 95-125 PSI
  • Drain valves and pressure relief valve
  • Quick connect fittings

Premium Series / Gasoline

ImageProductDetails

PR1-8GM Air Compressor

PR1-8GM

8-Gallon, Single-Stage, Gas 212cc OHV Engine

  • 7.5 CFM @ 100 PSI
  • Canister intake filter
  • Convenient lifting handles
  • 7-gauge base plate to reduce vibration
  • Pneumatic tire with tube and steel hub
  • Idle control with continuous run
  • Regulator and two gauges
  • Manual drain valves for proper maintenance

PR2-8GM Air Compressor

PR2-8GM

8-Gallon, Two-Stage, Gas 300cc OHV Engine

  • 17.2 CFM @ 175 PSI
  • Canister intake filter
  • Convenient lifting handles
  • 7-gauge base plate to reduce vibration
  • Pneumatic tire with tube and steel hub
  • Idle control with continuous run
  • Regulator and two gauges
  • Manual drain valves for proper maintenance

AC Series / Gasoline

ImageProductDetails

AC1-5GH Air Compressor

AC1-5GH

5-Gallon, Single-Stage, Gas Hand-Carry 118cc Honda GX Engine

  • 4.4 CFM @ 100 PSI
  • Splash-lubricated aluminum crankcase
  • Aluminum head for heat dissipation
  • Compact and portable twin-tank design
  • 5-gallon twin-tank receivers
  • Powder-coated steel frame design
  • Rubber isolators
  • Drain valves and pressure relief valve
  • Quick connect fitting

AC1-8GH GX Engine

AC1-8GH

8-Gallon, Single-Stage, Gas 196cc Honda GX Engine

  • 13.1 CFM @ 100 PSI
  • Powder-coated 8-gallon twin-tank receivers
  • 10-in. flywheel for extra cooling and longer life
  • Splash-lubricated cast iron crankcase
  • Cast iron head for heat dissipation
  • 7-gauge base plate to reduce vibration
  • Convenient lifting handles
  • Pneumatic tires with tubes and steel hubs
  • Manual drain valves for proper maintenance

AC2-8GH Air Compressor

AC2-8GH

8-Gallon, Two-Stage, Gas 270cc Honda GX Engine

  • 17.2 CFM @ 175 PSI
  • Powder-coated 8-gallon twin-tank receivers
  • Splash-lubricated cast iron crankcase
  • Cast iron head for heat dissipation
  • 7-gauge base plate to reduce vibration
  • Convenient lifting handles
  • Pneumatic tires with tubes and steel hubs
  • Manual drain valves for proper maintenance
  • 161⁄2 flywheel for extra cooling and longer life

AC1-20GH Air Compressor

AC1-20GH

20-Gallon, Single-Stage, Gas 196cc Honda GX Engine

  • 13.1 CFM @ 100 PSI – Powder-coated ASME coded 20-gallon receiver tank
  • 12-in. flywheel for extra cooling and longer life
  • Splash-lubricated cast iron crankcase
  • Cast iron head for heat dissipation
  • 7-gauge base plate to reduce vibration
  • Convenient lifting handles
  • Pneumatic tires with tubes and steel hubs 
  • Manual drain valves for proper maintenance

AC2-20GH Air Compressor

AC2-20GH

20-Gallon, Two-Stage, Gas 270cc Honda GX Engine

  • 17.2 CFM @ 175 PSI
  • Powder-coated ASME coded 20-gallon receiver tank
  • Splash-lubricated cast iron crankcase
  • Cast iron head for heat dissipation
  • 7-gauge base plate to reduce vibration
  • Convenient lifting handles
  • Pneumatic tires with tubes and steel hubs
  • Manual drain valves for proper maintenance
  • 161⁄2-in. flywheel for extra cooling and longer life

AC2-20GHS Air Compressor

AC2-20GHS

20-Gallon, Two-Stage, Gas 270cc Honda GX Engine

  • 17.2 CFM @ 175 PSI
  • Powder-coated ASME coded 20-gallon receiver tank
  • Splash-lubricated cast iron crankcase
  • Cast iron head for heat dissipation
  • 7-gauge base plate to reduce vibration
  • Manual drain valves for proper maintenance
  • 161⁄2-in. flywheel for extra cooling and longer life

AC2-30GHS Air Compressor

AC2-30GHS

30-Gallon, Two-Stage, Gas 389cc Honda GX Engine

  • 29.0 CFM @ 175 PSI
  • Powder-coated ASME coded 30-gallon receiver tank
  • Electric start standard, battery and cables not included
  • Stationary truck mount kit standard, must be used when installing stationary unit to truck bed
  • Splash-lubricated cast iron crankcase
  • Cast iron head for heat dissipation
  • 7-gauge base plate to reduce vibration
  • Manual drain valves for proper maintenance
  • 161⁄2-in. flywheel for extra cooling and longer life

AC Series / Diesel

ImageProductDetails

AC2-30KDS

AC2-30KDS

30-Gallon, Two-Stage, 441cc Diesel 9.1 HP Kohler OHV Engine

  • 29.0 CFM @ 175 PSI
  • Powder-coated ASME coded 30-gallon receiver tank
  • Electric start standard, battery, box and cables not included
  • Glow plug equipped engine for easy starting in cold temperatures
  • Stationary truck mount kit standard, must be used when installing stationary unit to truck bed
  • Splash-lubricated cast iron crankcase
  • Cast iron head for heat dissipation
  • 7-gauge base plate to reduce vibration
  • Manual drain valves for proper maintenance
  • 161⁄2-in. flywheel for extra cooling and longer life (two-stage models)

AC Series / Electric

ImageProductDetails

AC2-80ES Air Compressor

AC2-80ES

80-Gallon, Two-Stage, Electric 5.0 HP, 230V Motor

  • 16.9 CFM @ 175 PSI – Electric motor, CSA listed
  • 230V single phase 60 Hz
  • Splash-lubricated cast iron crankcase
  • Aluminum head for heat dissipation
  • Cast iron cylinder
  • Powder-coated ASME coded 80-gallon receiver tank
  • Auto start/stop
  • 12-in. flywheel for extra cooling and longer life
  • Tank pressure gauge
  • Magnetic starter with mounting box and wire
  • Manual drain valves for proper maintenance

AC2-80ES-1 Air Compressor

AC2-80ES-1

80-Gallon, Two-Stage, Electric 7.5 HP, 230V Motor

  • 23.5 CFM @ 175 PSI
  • Electric motor, CSA listed
  • 230V single phase 60 Hz
  • Splash-lubricated cast iron crankcase
  • Aluminum head for heat dissipation
  • Cast iron cylinder
  • Powder-coated ASME coded 80-gallon receiver tank
  • Auto start/stop
  • 12-in. flywheel for extra cooling and longer life
  • Tank pressure gauge
  • Magnetic starter with mounting box and wire
  • Manual drain valves for proper maintenance

Couplers

ItemModel/Part Number

1/4” MPT Industrial Interchange Style

AWJ-0017-0043

1/4” MPT Automotive Style

AWJ-0017-0044

1/4” FPT Industrial Interchange Style

AWJ-0017-0045

1/4” FPT Automotive Style

AWJ-0017-0046

1/4” FPT Lincoln Style

AWJ-0017-0047

1/4” MPT ARO Style

AWJ-0017-0048

Coupler Test Bar

AWJ-0017-4952

Plugs

ItemModel/Part Number

1/4” MPT Industrial Interchange Style

AWJ-0017-0049

1/4” MPT Automotive Style

AWJ-0017-0050

1/4” MPT Lincoln Style

AWJ-0017-0051

1/4" MPT ARO Style

AWJ-0017-0052

1/4” FPT Industrial Interchange Style

AWJ-0017-0053

1/4” FPT Automotive Style

AWJ-0017-0054

1/4” FPT Lincoln Style

AWJ-0017-0055

1/4” FPT ARO Style

AWJ-0017-0056

Couplers/Plug Sets

ItemModel/Part Number

1/4” F Coupler, 1/4” M Plug Ind. Inter. Set

AWJ-0017-0045K

1/4” F Coupler, 1/4” M Plug Automotive Set

AWJ-0017-0046K

Fittings

ItemModel/Part Number

Barbed Hose Fitting (1/4” MNPT fits 3/8” ID Hose)

AWJ-0023-0069

Barbed Hose Fitting (1/4” MNPT fits 1/4” ID Hose)

AWJ-0023-0051

Brass Coupling (1/4” FNPT x 1/4” FNPT)

AWJ-0023-0002

Brass Coupling (1/4” MNPT x 1/4” MNPT)

AWJ-0023-0103

Barbed Hose Splicer (Fits 1/4” ID Hose)

AWJ-0023-0415

Barbed Hose Splicer (Fits 3/8” ID Hose)

AWJ-0023-0416

Air/Water Adapter Kit

ItemModel/Part Number

For Filling Tires with Liquid

AWJ-0023-0414

Chucks

ItemModel/Part Number

Dual Foot Direct Air Line Chuck (1/4” FNPT)

AWJ-00AT-3001

Ball Foot Direct Air Line Chuck (1/4” FNPT)

AWJ-00AT-3002

Deluxe Inflator Gauge with 12” Hose

AWJ-00AT-3003

Blow Guns

ItemModel/Part Number

Blow Gun with Standard Rubber Nozzle

AWJ-00AT-3004

Blow Gun with Safety Nozzle

AWJ-00AT-3005

12” Blow Gun w/Standard Rubber Nozzle (6 per pack)

AWJ-00AT-3007

24” Blow Gun w/Standard Rubber Nozzle (6 per pack)

AWJ-00AT-3008

48” Blow Gun w/Standard Rubber Nozzle (6 per pack)

AWJ-00AT-3009

Air Hose

ItemModel/Part Number

24” Leader Hose with Swivel

AWJ-0015-0229

50’ x 3/8” Hybrid Hose

AWJ-0015-0328

25’ x 3/8” Hybrid Hose

AWJ-0015-0327

Filters

ItemModel/Part Number

1/4” Poly Bowl w/Bowl Guard & Manual Drain

AT-4004-J

1/2” Metal Bowl w/Sight Glass & Manual Drain

AT-4005-J

3/8” Poly Bowl w/Bowl Guard & Manual Drain

AT-4006-J

Disposable In-line Filter

AWJ-00AT-4007

Air Tool Filter

AWJ-00AT-4008

3/8” Filter/Regulator-Poly Bowl w/Manual Drain

AT-4011-J

In-Line Regulators

ItemModel/Part Number

1/4” Mini Regulator w/Gauge

AWJ-0022-0326

3/8” Regulator w/Gauge

AWJ-0022-0231

In-Line Lubricators

ItemModel/Part Number

1/4” Poly Bowl

AT-4009-J

3/8” Poly Bowl

AT-4010-J

High Flow Accessories

ItemModel/Part Number

EXTENSION TUBE-CYCLONE 12 IN

AT-3001-J

AIR GUN WITH CONE TIP

AT-3002-J

COUPLER-HF 1/4 BODY X 1/4 FNPT

AT-4013-J

PLUG-HF 1/4 BODY X 1/4 MNPT

AT-4014-J

SWIVEL PLUG-HF1/4 BODYX1/4MNPT

AT-4015-J

COUPLER AND PLUG KIT-HF 3 PC

AT-4016-J

COUPLER AND PLUG KIT-HF 7 PC

AT-4017-J

COUPLER-HF 1/4 BODY X 3/8 FNPT

AT-4018-J

PLUG-HF 1/4 BODY X 3/8 MNPT

AT-4019-J

COUPLER AND PLUG KIT-HF 7 PC

AT-4020-J

REUSABLE END - 3/8

AT-4808-J

REUSABLE END - 1/2

AT-4809-J

REUSABLE SPLICER - 3/8

AT-4810-J

REUSABLE SPLICER - 1/2

AT-4811-J

250’ x 1/2” Hybrid polymer Hose Spool

AT-4805-J

250’ x 3/8” Hybrid polymer Hose Spool

AT-4806-J

Coupler-HF 1/4 BODY X 1/4 MNPT

AT-4021-J

PLUG-HF 1/4 BODY X 1/4 MNPT - 2 PACK

AT-4022-J

Coupler-HF 1/4 BODY X 3/8 MNPT

AT-4023-J

PLUG-HF 1/4 BODY X 3/8 MNPT - 2 PACK

AT-4024-J

90 days warranty is offered for Couplers, Plugs, Couplers/Plug Sets, Fittings, Air/Water Adapter Kit, Chucks, Blow Guns, Air Hose, Filters, In-Line Regulators, In-Line Lubricators, and Auto Electric Drain.

*Equipment, models and prices may vary by dealer. Product features subject to change. Third party trademarks referenced herein are trademarks of those third parties. Please contact your local John Deere dealer for more detailed information.