2410Chisel Plow
- Variety of models and sizes available
- Precise and accurate depth control
- Exclusive AccuDepth™ system
- Excellent residue-handling capability
Features
Expand All
Collapse All
2410 Drawn Chisel Plow
2410 Chisel Plow
3.4-m (134-in.) four-bar frame
Walk-Over wheels
Shovels, chisels, and sweeps
John Deere Implement Detection
Variety of models and sizes available
2410 Drawn Chisel Plow
The 2410 Drawn Chisel Plow is available in rigid and rigid fold, three-section folding, and five-section folding frame models.
Models |
Type of fold |
Standards |
Drawn rigid |
Non-fold or horizontal fold |
Spring reset, TruPosition™, or |
Drawn flexible |
Three-section |
Spring reset, TruPosition, or |
Drawn flexible |
Five-section |
TruPosition |
NOTE: Tru-Depth standards are available through 10.06 m (33 ft) only.
Excellent residue-handling capability
2410 Chisel Plow
The 2410 Chisel Plow has excellent residue-handling capability in primary tillage at all residue levels.
Typical percents of residue cover remaining from the 2410 are listed in the following table. The percentages do not take into account variables such as the condition of the residue, speed, and soil type.
For machines with 305-mm (12-in.) spacing:
Starting |
Remaining non-fragile* |
Remaining fragile** |
||||||
with |
with |
with |
with |
with |
with |
with |
with |
|
100 |
80 |
70 |
60 |
60 |
55 |
50 |
45 |
45 |
90 |
72 |
65 |
55 |
55 |
50 |
45 |
40 |
40 |
80 |
65 |
56 |
50 |
50 |
45 |
40 |
35 |
35 |
70 |
55 |
50 |
42 |
42 |
38 |
35 |
30 |
30 |
60 |
50 |
42 |
35 |
35 |
33 |
30 |
27 |
27 |
50 |
40 |
35 |
30 |
30 |
27 |
25 |
22 |
22 |
40 |
32 |
28 |
25 |
25 |
22 |
20 |
18 |
18 |
*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (less than 45 bu), sunflower, peanuts, and cotton.
For machines with 406-mm (16-in.) spacing:
Starting |
Remaining non-fragile* |
Remaining fragile** |
||||||
with |
with |
with |
with |
with |
with 51-mm x |
with |
with 76-mm |
|
100 |
83 |
73 |
63 |
63 |
55 |
50 |
45 |
45 |
90 |
75 |
68 |
58 |
58 |
50 |
45 |
40 |
40 |
80 |
68 |
59 |
53 |
53 |
45 |
40 |
35 |
35 |
70 |
58 |
53 |
45 |
45 |
38 |
35 |
30 |
30 |
60 |
53 |
45 |
38 |
38 |
33 |
30 |
27 |
27 |
50 |
43 |
38 |
33 |
33 |
27 |
25 |
22 |
22 |
40 |
35 |
31 |
28 |
28 |
22 |
20 |
18 |
18 |
*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton.
Rugged frame construction
3.4-m (134-in.) four-bar frame
Operators are requiring faster field working speeds, larger implements, and tractors because of a dramatic increase in farm size. The market is asking for and receiving tractors with more torque, more weight, and more horsepower.
Accommodating 600 engine horsepower tractors requires more from implement frame and hitch components, including thicker frame tubes, additional diagonal bracing, and frame gussets.
The frame is constructed of continuous 102-mm x 102-mm (4-in. x 4-in.) cross members inserted through 51-mm x 152-mm (2-in. x 6-in.), 76-mm x 152-mm (3-in. x 6-in.), and 102-mm x 152-mm (4-in. x 6-in.) fore-aft members. The mainframe boasts a structure made up of 102-mm x 152-mm (4-in. x 6-in.) fore-aft tubes.
The large frame member sizes, joint welds, and wheel module placement adds to the structural integrity, providing a stable front-to-rear and side-to-side operation.
Frame construction offers:
-
Consistent operating depth
- Level operation
- Restricts frame dip
Walk-Over™ wheels help provide consistent working depth
Walk-Over wheels
Provide a consistent working depth in uneven ground for level seedbeds and complete weed control.
Staggered wheel design provides extra room for residue flow, obstacles, and transport stability.
Wide variety of ground-engaging tools available
Shovels, chisels, and sweeps
A wide variety of tools such as sweeps, chisels, and twisted shovels are available for the operator to maintain surface residue and ground profile under varying weather and soil conditions.
Click here to explore more about points, chisels, and sweeps.
Automate implement setup on GreenStar™ 3 2630 Display
John Deere Implement Detection
Spend less time taking measurements and trying to remember how your implement was setup last year. With John Deere Implement Detection, simply connect your implement to the tractor. All of the settings used from the previous year or the factory-installed settings on new machines will automatically enter into the GreenStar 3 2630 Display.
How it works
When an implement with Implement Detection is connected to a tractor utilizing a GreenStar 3 2630, a notification will be populated informing the operator that an implement is now on the CANBUS. The one page notification will indicate the implement's name, connection type, and other settings saved to the implement controller.
The notification will address each individual setting showing the operator whether the implement settings successfully transferred to the 2630 or not. From this notification, users have the option to accept settings and move to the run page, or they can select the Equipment soft key that takes them to the equipment setup page so they can make adjustments to implement settings if necessary.
All changes to implement settings will override previous settings and will be stored to the controller. If the implement is moved between tractors or displays switched, the implement settings are automatically sent to the display once the ISO connector is reconnected.
Populated settings of the implement on the GreenStar 3 2630 Display
Required implement information |
Implement Detection |
Type |
X |
Model |
X |
Name |
X |
Connection type |
X |
Widths |
X |
GPS offsets |
X |
Track spacing |
X |
John Deere Implement Detection provides a Green-on-Green advantage that addresses the single-most frustrating issue in the world of precision agriculture today - usability. Implement Detection will allow John Deere precision technology users to spend more time working and less time setting up their equipment. Enhancements such as this also begin to eliminate the mistakes made by operators in the field as well as reduce the dependence on others to help get the equipment setup like it was the prior year.
Producers with non-John Deere implements can still see the benefits of John Deere Implement Detection when paired with a GreenStar 3 2630 Display and an independent Implement Detection controller. John Deere Implement Detection is designed to be paired with equipment not currently utilizing a controller; such equipment includes tillage implements, planter/seeders, dry-box fertilizer spreaders and sprayers.
NOTE: Implement Detection is not compatible with AccuDepth™ implement system.
Specifications
Add Model
| Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 2410 Chisel Plow |
Key Specs
| Working widths - Rigid frame | Option 1 3.56 to 5.28 m 11.67 to 17.33 ft 3.05 to 5.49 m 10 to 18 ft |
|||
|---|---|---|---|---|
| Transport width -Rigid frame | ||||
| Maximum depth | Rigid, TruPosition: max: 20.32 cm 8 in. Spring-reset TruDepth: max: 30.5 cm 12 in. |
|||
| Miles per hour | 8 to 11.3 km/h 5 to 7 mph |
|||
| Horsepower per foot | 14.7 to 24.5 kW/m 6.0 to 10 hp/ft Rigid and TruPosition standards on spacing: 30.5 cm 12 in. 11 to 18.35 kW/m 4.5 to 7.5 hp/ft Rigid and TruPosition standards on spacing of: 40.6 cm 16 in. 14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.) 11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.) |
|||
| Standard spacings - Inches | 30.5 cm 12 in. 40.6 cm 16 in. |
Fold
| Type | Rigid, rigid-fold, 3-section fold, 5-section fold |
|---|
Working widths
| Rigid frame | Option 1 3.56 to 5.28 m 11.67 to 17.33 ft |
|||
|---|---|---|---|---|
| Drawn rigid fold | Option 1 5.3 to 6.25 m 17.5 to 20.5 ft |
|||
| 3-section | Option 1 6.65 to 8.5 m 21.83 to 28 ft Mainframe: 3.05 m 10 ft Option 2 7.2 to 11.79 m 23.67 to 38.7 ft Mainframe: 3.66 m 12 ft Option 3 9.35 to 13.1 m 30.67 to 43 ft Mainframe: 4.57 m 15 ft |
|||
| 5-section | Option 1 13.4 to 16.66 m 44 to 54.67 ft Mainframe: 3.66 m 12 ft Option 2 14.33 to 19.2 m 47 to 63 (15 mainframe) ft Mainframe: 4.57 m 15 ft |
Transport width
| Rigid frame | Option 1 3.05 to 5.49 m 10 to 18 ft |
|||
|---|---|---|---|---|
| Drawn rigid fold | Option 1 3.35 to 4.88 m 11 to 16 ft |
|||
| 3-section | Option 1 4.67 m 15.33 ft Mainframe: 3.05 m 10 ft Option 2 5.36 m 17.58 ft Mainframe: 3.66 m 12 ft Option 3 6.27 m 20.58 ft Mainframe: 4.57 m 15 ft |
|||
| 5-section | Option 1 5.26 m 17.25 ft Mainframe: 3.66 m 12 ft Option 2 Mainframe: 6.1 m 20 ft Mainframe: 4.57 m 15 ft |
Transport height
| Rigid frame | ||||
|---|---|---|---|---|
| Rigid over-center fold | ||||
| 3-section | Option 1 3.3 to 4.2 m 10.83 to 13.75 ft Mainframe: 3.05 m 10 ft Option 2 3.28 to 5.05 m 10.75 to 16.58 ft Mainframe: 3.66 m 12 ft Option 3 3.89 to 5.36 m 12.75 to 17.58 ft Mainframe: 4.57 m 15 ft |
|||
| 5-section | Option 1 4.37 to 4.98 m 14.33 to 16.33 ft Mainframe: 3.66 m 12 ft Option 2 4.4 to 5.3 m 14.42 to 17.42 ft Mainframe: 4.57 m 15 ft |
Operation depth
| Maximum depth | Rigid, TruPosition: maximum: 20.32 cm 8 in. Spring-reset TruDepth: maximum: 30.5 cm 12 in. |
|---|
Operating speed
| Miles per hour | 8-11.3 km/h 5 to 7 mph |
|---|
Horsepower required
| Horsepower per foot | 14.7 to 24.5 kW/m kW 6.0 to 10 hp/ft Rigid and TruPosition standards on spacing: 30.5 cm 12 in. 11 to 18.35 kW/m 4.5 to 7.5 hp/ft Rigid and TruPosition standards on spacing of: 40.6 cm 16 in. 14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.) 11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.) |
|---|
Depth control
| Option 1 | Single point | |||
|---|---|---|---|---|
| Option 2 | AccuDepth | |||
| Option 3 |
Hydraulic requirements
| Standard | ||||
|---|---|---|---|---|
| Option 1 | ||||
| Option 2 |
Electrical requirements
| Standard | ||||
|---|---|---|---|---|
| Option 1 | ||||
| Option 2 |
Hitch
| Description | T-Hitch: on Rigid and 3-section: 15.2x25.4 cm 6x10 in. On 5-section: 15.2x30.5 cm 6x12 in. |
|---|
Frame
| Tubing | High strength, box beam steel cross tubes: 10.2x10.2 cm 4x4 in. End tubes, patented 4-bar tube-through-tube frame design, welded construction: 5.08x12.7 cm 2x5 in. |
|||
|---|---|---|---|---|
| Number of ranks | ||||
| Fore-and-aft | 340.4 cm 134 in. |
|||
| Underframe clearance | Rigid and TruPosition: 71.1 cm 28 in. Spring-reset and TruDepth: 81.3 cm 32 in. |
Standard spacings
| Inches | 30.5 cm 12 in. 40.6 cm 16 in. |
|---|
Standard options
| Option 1 | Spec 3.2x5.08x71.1 cm 1.25x2x28 in. Maximum operating depth 20.3 cm 8 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. Rigid |
|||
|---|---|---|---|---|
| Option 2 | Spec 3.2x5.08x81.3 cm 1.25x2x32 in. Trip height 25.4 cm 10 in. Maximum operating depth 20.3 cm 8 in. Underframe clearance 81.3 cm 32 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. Spring-reset |
|||
| Option 3 | Spec 3.2x5.08x71.1 cm 1.25x2x28 in. Trip height 25.4 cm 10 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. TruPosition |
|||
| Option 4 | Spec 5.08x3.2x81.3 cm 2x1.25x32 in. Trip height 27.9 cm 11 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 81.3 cm 32 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. TruDepth |
Ground-engaging components
| Choices | Variety of sweeps, shovels, and chisel points |
|---|
Wheels
| Centerframe depth control wheels and tires | Option 1 Rigid: Castering front and walk-over tandem rear with (6) 9.5L-15 FI load range D tires Option 2 3-section: mainframe: 3.05 m 10 ft Castering front with (2) 11L-15 FI load range D tires and single rear with (2) 12.5L-15 FI load range F tires Option 3 3-section mainframe of: 3.66 m 12 ft through 10.4 m 34 ft Castering front and walk-over tandem rear with (6) 11L-15 FI load range D tires Option 4 3-section: mainframe: 3.66 m 12 ft 0 through 11.79 m 0 through 38.67 and mainframe of: 4.57 m 15 ft Castering front and walk-over tandem rear with (6) 11L-15 FI load range F tires Option 5 5-section: Castering front and walk-over tandem rear with (6) 12.5L-15 FI load range F tires |
|||
|---|---|---|---|---|
| Wing frame wheels and tires | Option 1 3-section: mainframe: 3.05 m 10 ft Castering front and walk-over tandem rear with (6) 11L-15 FI load range D tires Option 2 3-section: mainframe: 3.66 ft 12 ft through 10.36 m 34 ft Castering front and walk-over tandem rear with (6) 11L-15 FI load range D tires Option 3 3-section: mainframe: 3.66 m 12 ft 10.97 through 11.79 m 36 through 38.67 ft and mainframe: 4.57 m 15 ft Castering front and walk-over tandem rear with (6) 11L-15 FI load range F tires Option 4 5-section: (Inner wings):Castering front with (2) 11L-15 FI load range D tires and walk-over tandem rear with (4) 12.5L-15 FI load range F tires; (Outer wings): Castering front and walk-over tandem rear with (6) 11L-15 FI load range D tires |
|||
| Stabilizer wheels |
No basket harrows
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 |
Rolling basket harrow
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 |
Rear hitch
| Tubing size | Rectangular box construction: 7.62x12.7 cm 3x5 in. |
|||
|---|---|---|---|---|
| Telescoping | Yes | |||
| Tongue weight rating | 45.4 kg 100 lb |
|||
| GVW | 10,000 | |||
| Wiring harness for transport lights | includes Y-harness, allowing both the 2410 and towed implement lights to work simultaneously | |||
| Hydraulic hoses and couplers | Available as field attachment |
Warranty
| Description | 3-year frame and standard warranty |
|---|
Additional feature
| Opton 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 | ||||
| Option 4 | ||||
| Option 5 |
Additional information
| Date collected |
|---|
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Product features are based on published information at the time of publication. Product features are subject to change without notice. Contact your local John Deere dealer for more information.