2680HHigh Performance Disk
- Cover more acres at 10-14 mph (16-22.5 km/h)
- Mix and bury residue for faster breakdown
- Individually mounted blades
- Provides a consistent field finish in spring or fall
- Now compatible with TruSet™ technology
Features
Expand All
Collapse All
Integral three-point rigid machine
Three-section drawn machine
Individually mounted blades
Rubber torsion elements
Keep the tool engaged while passing over obstructions
Wings follow the ground contour
Cage roller
Spring roller
Rubber roller
Wide range of working widths available to match acreage and power requirements
Integral three-point rigid machine
Three-section drawn machine
The 2680H High-Performance Disk gives operators the ability to cover acres quickly, increasing their productivity. This two-season tool can operate up to 22.5 km/h (14 mph) in field.
This tool is available in fifteen configurations from 2.4 m to 13.7 m (8 ft to 45 ft). The 2680H requires 34.25 kW/m (14 hp/ft), but in certain hilly, soft, or wet conditions it may require an additional 25 percent engine horsepower to maintain operating speeds at preferred working depth.
Integral three-point rigid models
| Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
| 2.5 m (8 ft, 4 in.) | 4.7 ha (11.6 acres) |
| 3.05 m (10 ft) | 5.6 ha (13.9 acres) |
| 3.6 m (11 ft, 8 in.) | 6.6 ha (16.3 acres) |
One-section drawn models
| Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
| 2.5 m (8 ft, 4 in.) | 4.7 ha (11.6 acres) |
| 3.05 m (10 ft) | 5.6 ha (13.9 acres) |
| 3.6 m (11 ft, 8 in.) | 6.6 ha (16.3 acres) |
Two-section drawn models
| Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
| 4.85 m (15 ft, 11 in.) | 9.0 ha (22.2 acres) |
| 5.4 m (17 ft, 7 in.) | 9.8 ha (24.3 acres) |
| 6.4 m (20 ft, 11 in.) | 11.8 ha (29.2 acres) |
| 7.4 m (24 ft, 4 in.) | 13.7 ha (33.9 acres) |
Three-section drawn models
| Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
| 7.6 m (25 ft) | 14.1 ha (34.8 acres) |
| 9.1 m (30 ft) | 16.9 ha (41.8 acres) |
| 10.7 m (35 ft) | 19.7 ha (48.8 acres) |
| 12.2 m (40 ft) | 22.6 ha (55.8 acres) |
| 13.7 m (45 ft) | 25.4 ha (62.7 acres) |
*NOTE: Minimum overlap of 15.2 cm (6 in.).
Individually mounted blades
Individually mounted blades
Rubber torsion elements
The 2680H High-Performance Disk features individually mounted blades. These blades, supported by rubber torsion elements, can travel up to 22.9 cm (9 in.) while passing over an obstruction, like a rock. This allows the rest of the tool to remain engaged and continue working, allowing for better ground contour.
Keep the tool engaged while passing over obstructions
To also follow ground contour, wings on the three-section machines flex to stay engaged on hilly or terraced ground.
Wings follow the ground contour
Blades are also easy to replace. Rather than having to remove an entire gang, just replace an individual blade.
Rear attachment options to match the operation
Cage roller
Spring roller
Rubber roller
Producers can choose from three rear attachment options to match their operation. Options include a cage roller, spring roller, and rubber roller.
The cage roller is the most versatile option. Choose this rear attachment if the primary application is fall tillage. It works in all soil types and conditions and has a diameter of 64.8 cm (25.5 in.).
The spring roller is the most specialized. It works in light/medium soils and can provide a level seedbed with additional firming. Individually mounted tines work to prevent plugging of the roller. Avoid using it in rocky ground. It has a diameter of 62.2 cm (24.5 in.).
The rubber roller is best for firming and preparing a seedbed in the spring. It works best in lighter drier soils where a firm finish and anchored residue is a primary concern. This rear attachment works in most soil types and features a hydraulically adjustable scraper. It has a diameter of 63.5 cm (25 in.).
Specs & Compare
| Specs & Compare | ||||
|---|---|---|---|---|
| John Deere 2680H High Performance Disk |
Key Specs
| Working width | 3.56 m 11.67 ft |
|||
|---|---|---|---|---|
| Transport width | 3.83 m 12.58 ft |
|||
| Transport height | 3.07 m 10.08 ft |
|||
| Working depth | 5.1 to 15.2 cm 2 to 6 in. |
|||
| Blade spacing | 25.4 cm 10 in. |
|||
| Horsepower per ft | 10.4 kW or more 14 hp or more |
|||
| Operating speed | 16.1 to 22.5 km/h 10 to 14 mph |
Machine
| Working width | 3.56 m 11.67 ft |
|||
|---|---|---|---|---|
| Transport width | 3.83 m 12.58 ft |
|||
| Transport height | 3.07 m 10.08 ft |
|||
| Gang standards | ||||
| Gang angle | ||||
| Purpose | Primary/Secondary | |||
| Working depth | 5.1 to 15.2 cm 2 to 6 in. |
|||
| Weight per blade | 137 kg 302 lb |
|||
| Blade size | 50.8 cm 20 in. |
|||
| Blade spacing | 25.4 cm 10 in. |
|||
| Horsepower per ft | 10.4 kW or more 14 hp or more |
|||
| Operating speed | 16.1 to 22.5 km/h 10 to 14 mph |
|||
| Blade concavity | ||||
| Blade thickness |
Number of blades
| Front blades | 14 | |||
|---|---|---|---|---|
| Rear blades | 14 | |||
| Total | 28 |
Number of C-Springs
| Main frame front | ||||
|---|---|---|---|---|
| Main frame rear | ||||
| 1st wing front | ||||
| 1st wing rear | ||||
| 2nd wing front | ||||
| 2nd wing rear | ||||
| Total |
Additional information
| Date collected |
|---|
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.