859MHTracked Harvester
- Net Power: 224 kW (300 hp) at 1,900 rpm
- Max. Boom Reach: 9.91 m (32 ft. 6 in.)
- Tractive Effort: 373 kN (83,876 lbf)
Features
Expand All
Collapse All
Inside the cab of a 953M
Floor-to-ceiling front window
Boom control pattern with IBC
Boom control pattern without IBC
Boom joystick pattern
Mobile device using JDLink™
TimberMatic™ Maps monitor displaying live production data
Machine Health Monitoring Center
An operator stands on the enclosure platform to service the engine
Service doors and enclosure open on an 853M
A grease bank is located near the battery disconnect, to easily service the boom joints
The rear service ladder provides access to the diesel fuel and diesel-exhaust fluid (DEF) fills
U7 undercarriage
859MH working on a hillside
Slope indicator on the primary display unit (PDU)
Operate in comfort
Inside the cab of a 953M
Floor-to-ceiling front window
Operating for long hours is common. As the day goes on, maintaining consistent productivity is important. One factor in keeping high, consistent productivity is a comfortable operating environment. The M-series boasts greatly increased window area for better visibility and more cab space over prior models. Low-effort electrohydraulic (EH) controls allow you to customize the button and lever layout to your preference and save your settings when switching between operators.
- Large and spacious operator station designed with operator input
- Ergonomic controls and increased cab volume over prior models
- Floor-to-ceiling front window, large side windows, skylight, and optional floor window (standard on leveling machines) significantly expands operator visibility
- Optional heated and ventilated seat
Intelligent Boom Control (IBC) enables precise boom movements
Boom control pattern with IBC
Boom control pattern without IBC
Boom joystick pattern
With IBC |
Without IBC |
|
A |
Extend |
Stick out |
B |
Retract |
Stick in |
C |
Lower |
Hoist down |
D |
Raise |
Hoist up |
Intelligent Boom Control (IBC) smooths boom operations, making them more precise and efficient, to increase operator productivity compared to a Deere tracked harvester without IBC. With IBC, you no longer need to control each boom function independently. Just control the direction of the head with a single lever command, and IBC will automatically guide the boom and cylinders accordingly. IBC also utilizes adaptive swing control to adjust the swing speed based on the overall position of the head. This makes controlling the head more precise and intuitive, especially for new operators, compared to machines without IBC.
- Customizable control pattern and boom motions
- More efficient and consistent boom movements
- Enhanced cylinder cushioning reduces shock loading at end-of-stroke
- Overall improved operator experience
- Simple and intuitive to operate
Gain valuable insights with Precision Forestry solutions
Mobile device using JDLink™
TimberMatic™ Maps monitor displaying live production data
Machine Health Monitoring Center
Now included in base machine, the JDLink telematic system provides the foundation for John Deere’s Precision Forestry solutions. These systems help optimize your machine, your uptime, and your jobsites, which ultimately lead to improved production efficiency.
- JDLink connectivity enables you to view several parameters of your machine, including its location, fuel level, average fuel burn rate, idle time, machine utilization, and much more
- When enabled, John Deere Connected Support™ allows the dealer to provide remote diagnostics, rapid service response with the right part in hand, and parts availability; all to maximize machine uptime
- John Deere’s centralized Machine Health Monitoring Center analyzes data from thousands of connected machines, identifies trends, and develops recommended actions to help prevent downtime
- TimberMatic Maps gives enhanced visibility to the jobsite, which streamlines communication and increases efficiency
- TimberManager™ provides remote visibility to your operation from any device, allowing you to make smart business decisions based on real-time production data
Serviceability within easy reach
An operator stands on the enclosure platform to service the engine
Service doors and enclosure open on an 853M
A grease bank is located near the battery disconnect, to easily service the boom joints
The rear service ladder provides access to the diesel fuel and diesel-exhaust fluid (DEF) fills
Easy access to service components helps operators perform daily checks and any scheduled maintenance, which helps minimize unplanned downtime and costly repairs down the road. The 800M-series tracked machines feature a fully opened enclosure and service doors for excellent access to all scheduled maintenance areas.
- Smart debris management designed to keep your workspace free and clear
- Variable-speed reversing fan helps minimize debris build-up in the cooling package
- Swing-out doors provide wide-open access to the cooling package
- Optional vacuum pump for convenient servicing of hydraulic components
- Grease banks for servicing hard-to-reach joints
- Large fuel tank extends intervals between fill-ups
- Remote diagnostics and machine monitoring with JDLink™
Sure-footed stability
U7 undercarriage
The M-series undercarriage is purpose built to handle severe forestry applications while maintaining maneuverability, especially in thinning operations. The track frames are shaped to deflect debris while also providing strength and stability.
- Long, wide undercarriage provides solid balance to maximize stability
- Exceptional tractive effort for negotiating difficult or steep terrain, deep snow, and swamps
- Optional closed-loop hydrostatic drive on 800M/MH models for increased multifunctioning performance
- Various track pad widths and grouser types are offered to best suit the machine to its application
- Optional tri-track helps prevent premature wear due to track twisting
Maximize stability on steep slopes
859MH working on a hillside
John Deere’s leveling system with smooth-cushioned control keeps the center of gravity over the tracks for exceptional stability on steep slopes. The expansive leveling envelope tilts up to 26-degrees forward for excellent steep-slope operation. Combined with a long and wide undercarriage, the leveling system maximizes performance in challenging terrain.
- Additional operator comfort when maneuvering on slopes
- Common undercarriage between the 859M and 959M leveling machines
- Maximizes boom and swing performance when working on slopes
- Provides exceptional stability and continuous machine operation on extreme slopes
Slope indicator
An available option on all leveling M-series machines, the slope-monitoring system measures the actual ground-slope angle the machine is working on and displays it on the in-cab monitor, for more confident operation in tough steep-slope conditions and potentially greater overall efficiency.
Slope indicator on the primary display unit (PDU)
Specs & Compare
Add Model
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 859MH Tracked Harvester |
DRIVELINE
| Engine Manufacturer | John Deere | |||
|---|---|---|---|---|
| Engine Model | PowerTech Plus 6090H | |||
| Displacement, ltr (Inches³) | 9 (549) | |||
| Rated Speed, rpm | 2000 | |||
| Engine Output, kW (hp) | 224 (300) | |||
| Engine Torque, Nm (lbf / ft) | 1270 (937) | |||
| Carrier Rollers - Each Side | 2 | |||
| Track Rollers - Each Side | 10 | |||
| Track Shoe Width, mm (inches) | 610 (24) |
DIMENSIONS
| Height Over Cab, mm (ft/in) | 3920 (12 ft 10 in) | |||
|---|---|---|---|---|
| Width, mm (ft/in) | 3330 (10 ft 11 in) | |||
| Overall Track Length, mm (ft/in) | 4900 (16 ft 1 in) | |||
| Track Length On Ground, mm (ft/in) | 3830 (12 ft 7 in) | |||
| Tailswing Radius, mm (ft/in) | 1940 (6 ft 4 in) | |||
| Ground Clearance, mm (ft/in) | 748 (2 ft 5 in) | |||
| Superstructure Width, mm (ft/in) | 3150 (10 ft 4 in) | |||
| Slewing Angle, Degrees | 360 | |||
| Cab Leveling tilt (Forward), Degrees | 26 | |||
| Cab Leveling tilt (Rear), Degrees | 7 | |||
| Cab Leveling tilt (Side), ± Degrees | 7 |
CAPACITIES
| Fuel Tank, ltr (gallons (US)) | 870 (228.9) | |||
|---|---|---|---|---|
| Number of Alternators | 1 | |||
| Alternator Output, Amp | 100 |
PERFORMANCE
| Slew Speed, rpm | 6.8 | |||
|---|---|---|---|---|
| Travel Speed, kph (mph) | 3.6 (2.2) | |||
| Reference Harvesting Head | Waratah HTH622B | |||
| Felling Diameter, mm (inches) | 750 (29.5) | |||
| Delimbing Diameter, mm (inches) | 640 (25.2) | |||
| Delimbing Feed Rate, m/sec (ft/sec) | 5.7 (18.7) | |||
| Cutting Radius - Maximum, mm (ft/in) | 8840 (29 ft ) | |||
| Cutting Radius - Minimum, mm (ft/in) | 2710 (8 ft 11 in) | |||
| Cutting Swath Horizontal, mm (ft/in) | 6130 (20 ft 1 in) | |||
| System Voltage, V | 24 | |||
| Main Pump | Variable Displacement Axial Piston | |||
| Pump Flow, lt/min (gallons (US) / min) | 532 (141) |
WEIGHTS
| Operating Weight, kg (lbs) | 38050 (83900) | |||
|---|---|---|---|---|
| Weight - With Reference Head, kg (lbs) | 38050 (83900) | |||
| Weight - Without Reference Head, kg (lbs) | 35860 (79070) |
Complete Solutions
Forestry & Logging Technology
Achieve seamless coordination of your team's performance in the woods and the back office with John Deere forestry and logging technology.
Dealer Support
Stay up and running and lower your costs by making the most of our world-class dealer network.
Financing
You need a finance team that gets in the trenches to learn about your entire operation – not just your credit score.
Additional Equipment
Loaders, road-clearing machines, forestry heads and used equipment to round out your lineup.
Product Brochures
Parts & Maintenance
Operator Resources
Features and specifications are based on published information at the time of publication. Features and specifications are subject to change without notice.