0% APR fixed rate for 60, 72, or 84 months1, based on dealer participation
0% APR fixed rate for 60, 72, or 84 months1, based on dealer participation
For pricing and additional discounts, see your local John Deere Dealer.
Specs & Compare | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere 3043D Compact Tractor |
Engine power (gross) | SAE J1995 rated power: 31 kW 41.6 hp 42.2 PS at 2800 rpm |
|||
---|---|---|---|---|
Power take-off (PTO) power | 27.1 kW 36.3 hp |
|||
Steering hydraulics | 16.8 L/min 4.4 gpm |
|||
Implement hydraulics | 22.4 L/min 5.9 gpm |
|||
Hitch type | Category 1 | |||
Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
|||
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission | |||
Cruise control | No | |||
Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1288 kg 2840 lb Cab: Not applicable |
|||
Wheelbase | 1574 mm 62 in. |
Family | ||||
---|---|---|---|---|
Manufacturer | Yanmar® | |||
Engine model | 3TNV86CT-KJPT | |||
Engine power (gross) | SAE J1995 rated power: 31 kW 41.6 hp 42.2 PS at 2800 rpm |
|||
Power take-off (PTO) power | 27.1 kW 36.3 hp |
|||
Rated engine speed | 2800 rpm | |||
Type | ||||
Injection pump type | High pressure common rail direct injection | |||
Aspiration | Turbocharged | |||
Emissions compliance | Final Tier 4 | |||
Cylinders/displacement | 3 / 1.57 L 3 / 95.8 cu in. |
|||
Number of cylinders | Three | |||
Cylinder liners | Cast-in-block | |||
Bore and stroke | 86 x 90 mm 3.39 x 3.54 in. |
|||
Compression ratio | 19.1:1 | |||
Lubrication | Pressurized | |||
Cooling system | Liquid | |||
Air cleaner | Dual element | |||
Engine torque at rated speed | 105.7 Nm 78 lb-ft |
|||
Fuel tank capacity | 36.7 L 9.7 U.S. gal. |
Battery size | 600 CCA | |||
---|---|---|---|---|
Alternator (12-V) | 55 amp | |||
Starter size | 1.4 kW 1.9 hp |
Type | High pressure common rail direct injection | |||
---|---|---|---|---|
Fuel consumption |
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission | |||
---|---|---|---|---|
Optional transmission; forward/reverse | ||||
Left-hand reverser | Yes | |||
Transmission gear ranges | Four gears and two ranges | |||
Final drive | Spur gear | |||
Brakes | Wet disk | |||
Steering | Power steering | |||
Clutch, wet/dry | ||||
Clutch disk diameter wet clutch | ||||
Axle capacity | Front 880 kg 1940 lb Rear 1600 kg 3527 lb |
|||
Creeper | No | |||
Cruise control | No | |||
Differential lock | Yes | |||
Drawbar maximum vertical load |
Type | Open center | |||
---|---|---|---|---|
Pump rated output | Steering 16.8 L/min 4.4 gpm Implement 22.4 L/min 5.9 gpm 39.2 L/min 10.3 gpm |
|||
Pump type | Single gear | |||
Maximum operating pressure | 172 bar 2495 psi |
|||
Draft control sensing | Position control | |||
Remote control valves available | Up to two (optional) |
Type | Category 1 | |||
---|---|---|---|---|
Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
Standard | At 2400 rpm: 540 rpm | |||
---|---|---|---|---|
Optional | ||||
Control | Mechanical | |||
Clutch | Transmission | |||
Brake (for mid and rear PTO) | Wet disk | |||
Engagement method |
Crankcase with filter | 4.5 L 4.8 gal. |
|||
---|---|---|---|---|
Transmission and hydraulic system | 33 L 34.8 qt |
Type | Spur gear | |||
---|---|---|---|---|
Differential lock |
Rollover protective structure | Type Foldable ASABE S478 |
|||
---|---|---|---|---|
Platform - flat/straddle | Straddle | |||
Gear shift location - console/floor | Right-hand side |
Compliance | ||||
---|---|---|---|---|
Visibility | ||||
Air conditioning, temperature differential | ||||
Doors | ||||
Noise rating | ||||
Seat equipment |
Height | ||||
---|---|---|---|---|
Wheelbase | 1574 mm 62 in. |
|||
Front axle clearance | Minimum: 331 mm 13 in. Maximum: 353 mm 13.9 in. |
|||
Turning radius with brakes | 1.63 m 5.3 ft |
|||
Turning radius without brakes | ||||
Limited slip differential | ||||
Approximate shipping weight (open-station; cab) | OOS: 1288 kg 2840 lb Cab: Not applicable |
Front | R1 Bar: 7-14 R3 Turf: 27x8.5-15 R4 Industrial: 25x8.5-14 |
|||
---|---|---|---|---|
Rear | R1 Bar: 11.2-24 R3 Turf: 41x14-20 R4 Industrial: 15-19.5 |
|||
Front tread range | ||||
Rear tread spacing |
Toolbox | Yes | |||
---|---|---|---|---|
Tilt steering wheel | No | |||
12-V Outlet | No |
Date collected |
---|
*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Offers valid in the United States. Prices in U.S. dollars.
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.
1Offer valid on qualifying purchases made 01 August 2024 through 25 October 2024. Subject to approved installment credit with John Deere Financial. Down payment may be required. Average down payment is 10%. $16.67; $13.89; $11.90 per month for every $1,000 financed. 0% APR for 60; 72; 84 months available based on dealer participation. Taxes, freight, setup, insurance, fees, and delivery charges couldincrease monthly payment. Sales to government agencies, company direct sales or other individuals or entities participating in any John Deere Special Discount Program or Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.