730Air Disk Drill
- See the flow of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring
- Double-disk openers offer precise depth
- Three tool widths and two seed row spacings
- Field Doc™ and Map-Based Prescriptions
Features
Expand All
Collapse All
Leading edge cuts through moderate residue levels
Narrow disk angle leaves smooth field finish
Individual press wheel depth adjustment
5-cm x 33-cm (2-in. x 13-in.) press wheel
5-cm x 33-cm (2-in. x 13-in.) press wheel
730 Level-Lift tilling, fertilizing, and seeding
Manual guidance
Integration advantages of Deere tractor, cart, tool and technology
To win big in small grains, it takes a seeding solution that superseeds your expectations. John Deere delivers with a complete line of everything you need – and the sizes you want – to seed for success. Air-hoe drills. Commodity air carts. No-till air drills. Openers. Fertilizer attachments. Central commodity systems. Box drills. Plus precision ag technology to stretch your productivity to higher levels. But it’s far more than iron and technology. It’s the exceptional agronomic know-how and unsurpassed dealer support in all phases of production to keep you running. With our latest additions to equipment and openers, our seeding solutions deliver the next-generation performance you need to help you reach the full potential of each seed. That’s our commitment to you.
Double-disk openers offer precise depth
Leading edge cuts through moderate residue levels
Narrow disk angle leaves smooth field finish
The 34.3-cm (13.5-in.) diameter double-disk openers are offset to create a narrow furrow for optimal seed placement. They feature aluminum boots and have a long-arm/short-arm stagger for residue clearance. Either 15.2-cm (6-in.) or 19-cm (7.5-in.) row spacing is available.
NOTE: 15.2-cm (6-in.) spacing is not recommended for heavy, sticky soils such as the Red River Valley of the North.
The 6-mm (1/4-in.) offset creates a leading edge and pinch point that is close to the soil surface for optimal penetration and residue cutting. Alternating of the blades with right and left leading edge prevents side drafting and leaves the field smooth with minimal soil throw.
Depth-gauging press wheels give accurate seed placement
Individual press wheel depth adjustment
Depth-gauging press wheels:
- Allow quick, easy opener depth control
- Assist in controlling furrow depth
- Promote positive seed-to-soil contact for good germination
- Adjustments can be made from 0 cm (0 in.) to 9 cm (3.5 in.) by increments of 6 mm (1/4 in.)
5-cm x 33-cm (2-in. x 13-in.) press wheels are available on the 730
5-cm x 33-cm (2-in. x 13-in.) press wheel
5-cm x 33-cm (2-in. x 13-in.) press wheel
For 15.2-cm (6-in.) row spacing:
- 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)
NOTE: 15.2-cm (6-in.) row spacing is not recommended for high-residue conditions or sticky soils like in the Red River Valley of the North.
For 19-cm (7.5-in.) row spacing:
- 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)
730 Level-Lift™ frame handles moderate residue with faster working speeds and consistent depth control
730 Level-Lift tilling, fertilizing, and seeding
The 730 Level-Lift Air Disk Drill frame is very similar to the 2210 Level-Lift Field Cultivator. The 730 LL Air Disk Drill is a secondary tillage and seeding tool, an industry exclusive from John Deere. This frame is designed to offer durable support for the double disk openers while providing flexibility over level to gently rolling terrain.
Frame components include:
- Front-mounted rockshaft
- Tube-Thru-Tube frame
- Hose and wiring harness support and protection
Faster working speeds and consistent depth are results of the above features.
The 730 Level-Lift frames are:
- Constructed of continuous five-bar Tube-Thru-Tube frame
- 10.2-cm x 10.2-cm (4-in. x 4-in.) cross members
- 7.6-cm x 15.2-cm (3-in. x 6-in.) centerframe hitch tubes
- 5-cm x 12.7-cm (2-in. x 5-in.) end tubes
The large frame member sizes, joint welds, and the wheel module placement add to the structural integrity, providing stable, consistent front-to-rear and side-to-side operation.
The frame:
- Is 3.4-m (11.2-ft) deep frame (fore-aft)
- Has 61-cm (24-in.) under-frame clearance
- Can handle residue amounts of up to 40 percent
The wings flex 7 degree up and down. They fold over center for a compact transport or storage profile.
The front-mounted rockshaft:
- Offers superior front-frame strength for unmatched side-to-side levelness
- Provides torsional rigidity for the hydraulic system
- Opens up the frame for true shank placement, improving overall residue flow
The TruPosition™ shanks have a trip force at 90.7 kg (200 lb) and a 25.4-cm (10-in.) trip height.
Manually steer using a simple user interface
Manual guidance
Manual guidance allows operators to manually steer by matching the machine icon with the line on the screen or by using the path accuracy indicator at the top of the guidance view screen.
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere 730 Air Disk Drill |
Key Specs
| Working widths | 28 ft 8.7 m |
|||
|---|---|---|---|---|
| Number of ranks | 4 ranks of c-shanks,1 rank seed openers | |||
| Number of sections | 3 | |||
| Opener - Type | Double disk | |||
| Underframe clearance | 24 in. 60.9 cm |
|||
| Mainframe - Centerframe width | 11-ft. 8-in. 3.56 m |
|||
| Mainframe - Wing flexibility | 11 degrees up, 9 degrees down | |||
| Harrow - Type | Tine tooth | |||
| Harrow - Attachment | Rolling Basket with 1-bar harrow | |||
| Seeding tool depth control - Range | 1/4 inch increments |
Sizes
| Working widths | 8.53 m 28 ft |
|||
|---|---|---|---|---|
| Number of ranks | 4 ranks of c-shanks,1 rank seed openers | |||
| Number of sections | 3 |
Opener
| Type | Double disk | |||
|---|---|---|---|---|
| Penetration force | Patented Active Hydraulic | |||
| Boot | aluminum | |||
| Quantity | 46 on 7.5-in. spacing 56 on 6-in. spacing |
|||
| Size | 13.5-in. (343 mm) with 0.25-in. (6 mm) offset | |||
| Spacing | 6-in. (15.2 cm) or 7.5-in. (19.1 cm) |
|||
| Down pressure | Opener down pressure: 105 lb./opener Press wheel down pressure: 65 lb. at 1500 psi |
Mainframe
| Type | 3-section drawn flexible | |||
|---|---|---|---|---|
| Size | 28 ft 8.7 m |
|||
| Centerframe width | 3.56 m 11-ft. 8-in. |
|||
| Cross tubes | 4x4-in. (102x102 mm) | |||
| End tubes | 2x5-in. (50x127 mm) | |||
| Hitch (tubular steel) | 6x10-in. (76x152 mm) | |||
| Rockshaft | 5.5 x 0.312-in. 140 x 7.92 mm |
|||
| Folding | over-center | |||
| Wing flexibility | 11 degrees up, 9 degrees down |
Clearance
| Fore-and-aft | 134 in. 3.51 m |
|||
|---|---|---|---|---|
| Underframe clearance | 24.1 in. 60.9 cm |
|||
| Between ranks range | 29 to 41-in. (73.7 to 104 cm) | |||
| Hydraulics | active hydraulic downpressure |
Harrow
| Type | Tine tooth | |||
|---|---|---|---|---|
| Attachment | Rolling Basket with 1-bar harrow |
Shanks
| Type | Tru-Position | |||
|---|---|---|---|---|
| Quantity | 37 | |||
| Size | 3/4 x 1-3/4 x 24-in. 19 x 44 x 610 mm |
|||
| Spacing | 9 in. 22.8 cm |
|||
| Trip clearance | 10 in. 25.4 cm |
|||
| Trip force | 200 lb 890 N |
|||
| Arc | 47 degree | |||
| Finishing tool | double bar harrow or rolling basket with single bar harrow |
Seeding tool depth control
| Type | On individual openers | |||
|---|---|---|---|---|
| Range | 1/4 inch increments |
Tires
| Wing; standard | (4) 9.5Lx15 Load Range D walk-over tandems | |||
|---|---|---|---|---|
| Gauge wheels, wing | 2-7.60x15 8PR | |||
| Centerframe; standard | (4) 11Lx15 Load Range D walk-over tandems | |||
| Gauge wheels, centerframe | ||||
| Castering stabilizer | (2) 7.60x15 8 PR |
Transport position
| Height | Maximum height: 12-ft. 9.3-in (3.90 m) Minimum height: 11-ft. 4.3-in (3.46 m) |
|||
|---|---|---|---|---|
| Width | 16-ft. 3.6-in. (4.97 m) | |||
| Transport clearance | With sweep extenders: 16.26-in. (413 mm) Without sweep extenders: 17.26-in. (438 mm) |
Machine weight
| With seed only | ||||
|---|---|---|---|---|
| With seed and fertilizer |
Tractor hydraulic requirements
| Minimum SCVs | 2 SCVs |
|---|
Warning lights
| Standard | Yes |
|---|
Freight
| Shipping location | Des Moines, IA |
|---|
Additional information
| Date collected |
|---|
-
455 Front-Folding Grain Drill -
730 Air Disk Drill -
1590 No-Till Drill -
C350L Leading Air Cart -
C350T Trailing Air Cart -
C400L Leading Air Cart -
C400T Trailing Air Cart -
C500L Leading Air Cart -
C500T Trailing Air Cart -
C550L Leading Air Cart -
C550T Trailing Air Cart -
C650L Leading Air Cart -
C650T Trailing Air Cart -
C850T Trailing Air Cart -
H540F Air Hoe Drill -
H541 Air Hoe Drill -
H550 Air Hoe Drill
-
H550F Air Hoe Drill
-
H560F Air Hoe Drill
-
H561 Air Hoe Drill
-
N530 No-Till Air Drill -
N530C No-Till Air Drill -
N530F No-Till Air Drill -
N536 No-Till Air Drill
-
N536C No-Till Air Drill
-
N540 No-Till Air Drill
-
N540C No-Till Air Drill
-
N540F No-Till Air Drill
-
N542 No-Till Air Drill
-
N542C No-Till Air Drill
-
N543F No-Till Air Drill
-
N550 No-Till Air Drill
-
N560 No-Till Air Drill
-
N560F No-Till Air Drill
-
P540 Air Hoe Drill -
P556 Air Hoe Drill
-
P660 Precision Air Hoe Drill -
P670 Precision Air Hoe Drill -
P680 Precision Air Hoe Drill
-
P690 Precision Air Hoe Drill
Shop and Buy
Maintenance and Support
You May Also Be Interested In
Images of equipment models may be digitally generated, are for illustration purposes only, and are subject to change. Equipment models shown are typically base models and may not reflect all features, options, or attachments. Equipment availability may be limited. See your John Deere dealer for additional information.